|
Modular casework designed and manufactured by |
 |
|
|
SERIES 400 SPECIFICATIONS HEAVY DUTY LABORATORY GRADE PLASTIC LAMINATED MODULE |
||
|
Type A Surfaces: High-pressure laminate material in solid colors, decorator colors or wood grains. Materials will be selected from samples provided by South Texas Woodmill Inc. All materials will meet or exceed the latest NEMA Standards for GP 28. Surfaces included: All exterior surfaces or exposed module ends (1" thick) All exterior surfaces of exposed module backs (3/4" thick) All exterior surfaces of door and/or drawer fronts (3/4" thick) All exterior surfaces of module tops & bottom less than 72" above finished floor (3/4" thick) All exterior surfaces of knee‑space, legs and/or skirts. (3/4" thick) All interior surfaces of open units. Type B and/or C Surfaces: White, polyester laminate; this material will meet or exceed latest NEMA Standards for GP type, and/or white color, high-pressure, cabinet liner material which will meet or exceed latest NEMA Standards for CL type. (Depending on core selected). Surfaces include: Polyester surfaces: All inside surfaces of module body (3/4" thick) All adjustable shelves (3/4" thick) All top surfaces above 72" (3/4" thick) All bottom surfaces (3/4" thick) All case backs semi-concealed (1/4" thick) High-pressure cabinet liner: All inside surfaces of door and/or drawer fronts (3/4" thick) All stretchers (1 1/2" thick) Type D Surfaces: Optional material all sound and suitable for intended use. Surfaces include: All top rails for base cabinets (1" thick) All back cleats and/or glue blocks (3/4" thick) All knee space concealed frame parts (3/4" thick) Sub-strates: 3/4", 1", & 1 1/2”Particle Board: mat‑formed, wood particle-board which meets or exceeds the latest Commercial Standards, ANSI or NPA Standards for 40‑lb. medium density board, grade 1‑M‑3. (Veneered plywood core upon request same thickness) Hardboard: Meets or exceeds the latest Federal Specifications and Commercial Standards for "Tempered Hardboard" ‑ smooth one side. Edges: 3mm PVC edges are in standard colors, 3mm PVC is applied to all edges by a high temperature, hotmelt, edge-banding machine or GP‑28 laminate "specified". Glue Bonds: All adhesives used are those recommended by laminate and/or edging manufacturers. Adhesives are applied per manufacturer instructions under pressure and/or heat and pressure methods under controlled conditions. General Features and Specifications: See this page for other information, which pertains to all series casework. |
||
