|
Modular casework designed and manufactured by |
 |
|
|
SERIES 501 SPECIFICATIONS Conventional Face Front Laboratory Grade Wood Module Plastic Laminate Door & Drawer Fronts |
||
|
Type A / B Surfaces: Factory-finished hardwood plywood (7-ply minimum) specie is optional and must be specified either P/S Red Oak or R/C uniform Light Maple. Stain selection will be made from samples provided by South Texas Woodmill Hardwood / Hardwood Plywood Surfaces: All finished-end conditions All interior parts of open cases or cases with full, clear-glass doors All bottoms of wall cases 48" or more above floor All tops of tall cases 48" or more above floor All exposed leg and skirt assemblies All face fronts (3/4" thick hardboard) Type A Surfaces: All door and drawer fronts. Plastic laminate door and drawer fronts, color selection provided by South Texas Woodmill. H.P.L. in solid colors on substrate of 3/4" industrial grade particle board. Materials will be selected from samples provided by South Texas Woodmill, Inc. All materials will meet or exceed the latest NEMA standards for GP 28. Surfaces include: All doors All drawer heads Type C Surfaces: Factory-finished, softwood plywood (3/4" minimum thickness, 5-ply minimum), suitable for intended uses, specie is optional. Edges match finish selected. All case body and shelves Factory-finished, (1/4" minimum thickness) tempered hardboard All case backs Type D Surfaces: Optional material all sound and suitable for intended use. Edges: All doors and drawer edges 3mm PVC in standard colors, PVC tape or GP-28 laminate "specified" Factory Finishes: Type A Surfaces: 1. Sanding (120-grit) 2. Stain (if specified) 3. Sanding sealer 4. Sand (220-grit) stearated paper 5. Two part canalized varnish top coat Type C Surfaces: 1. Sanding (120-grit) 2. Sanding sealer 3. Sand (220-grit) stearated paper 4. Two part catalized varnish top coat General Features and Specifications: See this page for other information, which pertains to all series casework. |
||
